The new 18th Edition fire cable clips allow you to save time, save money and save lives, as well as ensuring your cable installations are compliant to the latest standards. Available to suit all cable sizes between 6mm and 11mm, with single and twin cable versions, the fire clip will securely hold a cable even during a fire, with a pack of 100 clips ensuring you have plenty even for big installations.
Now a requirement for ALL cable installations to be fire resistant, and no longer just fire alarm wiring or cables along escape routes, these clips have been designed to prevent firefighter deaths caused by entrapment from falling overhead cabling. It is essential that electrical cable installers are up to date with new regulations as they are ultimately responsible.
How Do Fire Clips Work?
The fastest fire-rated cable clip to install, and three times faster to install than traditional methods, these require less drilling and zero screwing.
To install, drill a 5.5mm diameter hole, slide the fire clip over the cable so it is seated in the rounded area, compress the clip together, and then simply insert into the hole by hand. And because each clip features several ‘teeth’ for advanced grip, the clip and cable are securely held in place no matter what happens.
It’s recommended these are installed every 300mm along a cable and is suitable for brick, concrete, masonry, blockwork, stone, wood and plasterboard.
Manufactured by Linian, the fire clip can boast numerous approvals. Compliant with the requirements of BS 8519:2010 and meeting the recommendations for Fire Rated Cable Fixings BS7671 Amendment 3, the clips have a melting point of over 1000°C. 90-minute and 120-minute fire resistance in accordance with DIN4102-12 and BSEN50200, the clips are smoke emission tested to London Underground Standard and resist tensile loads of 244N, meaning it could hold a bag of cement.
- Each pack contains 100 clips
- >1000°C melting point
- 90-minute fire resistance in accordance with DIN4102-12
- 120-minute fire resistance in accordance with BSEN50200
- Compliant with the requirements of BS 8519:2010
- Salt spray tested to 1000 hours
- Smoke emission tested to London Underground Standard
- Resist tensile loads of 244N
- Meets recommendations for Fire Rated Cable Fixings BS7671 Amendment 3
- Manufactured by Linian
18th Edition Fire Cable Clips
£31.83 ex. VAT£38.20 inc. VATSAVE £21.39 (40%)
- Never Beaten on Price
- 100-day Free Returns
- Spend £50 + vat for Free Delivery Next working day if ordered before 2pm